How the sleeve length should fit. With your arms hanging relaxed at your sides and the cuffs of the shirt unbuttoned, the sleeves should come down to the center of the back of your hand (or the first knuckle of your thumb)..
Likewise, how long should your shirt sleeves be?
The cuff should fit comfortably around your wrist but be tight enough that when buttoned it doesn't slide too far over your hand. Our general rule of thumb is that the cuff size should be 1.75-2” larger than the measurement of your wrist.
Subsequently, question is, should dress shirt sleeves ride up? The sleeves should hit just past the wrist, at the very beginning of the hand. They should show about 1/2″ under the sleeves of the jacket, and have enough allowance that they don't ride halfway up your forearms when you extend your arms.
Also to know, what do you do when your shirt sleeves are too long?
There's a quick and simple fix called “The Rubberband Trick”
- Grab 2 rubberbands.
- Remove your jacket, if it's on.
- Tug your shirt sleeves up until your cuffs hit your wrist (this is the appropriate sleeve length).
- Repeat for the other arm.
- Throw on your jacket, adjust as needed and you're ready to go!
How do I know my shirt size?
How to Determine Your Dress Shirt Size
- Take Your Neck Circumference Measurement. Place a cloth tape measure around the base of your neck, where your shirt collar would normally sit.
- Round Your Neck Measurement Up.
- Take Your Full Sleeve-Length Measurement.
- Measure Your Waist.
- Determine the Body Fit.
Related Question Answers
How do you know if your sleeves are too short?
When you bend your arm your cuff should not move uo the wrist. If it does your sleeves are too short and they will be if you are "hanging" the shirt to where you want it. There should be fullness in the sleeve extra length..so it doesn't ride up.How do you know if a shirt is too big?
If the shoulder seams, where the shoulder meets the sleeve of the T-shirt, are falling lower than just slightly off the edge of the shoulder, than the T-shirt is too big. If you see the seam midway between the shoulder and the elbow you know that you definitely need to find one smaller.How much does it cost to shorten sleeves on a shirt?
Here is a list of common, average prices for standard alterations on a variety of garments: Shorten dress-shirt sleeves: $19. Shorten jacket sleeves: $23 (without buttons) to $28 (with buttons) Take in the body of a jacket: $40 (two seams) to $52 (three seams)Where should suit sleeves fall?
Answer: Your suit jacket/blazer sleeve should end right above the top of your wrist bone (or the hinge of your wrist). However, in order to show the proper amount of dress shirt cuff based on the correct suit jacket sleeve length, your shirt sleeve length must obviously fit correctly.How far should sleeves stick out of suit?
Jacket Sleeve Length “A half-inch of linen” is a good, old-fashioned guideline for the relationship between a suit jacket and the shirt worn under it — about half an inch of the shirt cuff should be visible beyond the jacket cuff. That said, it's a general guideline, and you don't need to get too obsessive.Can a tailor make sleeves slimmer?
While it may seem pretty obvious that you can have your sleeves made slimmer if they're too big, there are a host of options for sleeves that are too small as well. If your garment is too tight near the armhole, the tailor can drop it to create more room.How should a short sleeve shirt fit?
The simple answer on fit for short-sleeved shirts is to wear them slim but not tight. Let the seams of the shoulders hit right at or slightly above the point of your shoulder. Make sure you can button the neck comfortably, but that the chest buttons don't pull apart when you move your arms around.How tall should you be to wear a large shirt?
Tall Mens Shirts: Tall sizes generally fit men between 6'3" - 6'7", while Extra Tall men's shirts are usually reserved for those between 6'8" - 7'1". Note that there are sometimes exceptions, but this is a good starting point. Select your tall size based on your build, and then find the proper length.Where should a shirt sleeve sit?
With your arms hanging relaxed at your sides and the cuffs of the shirt unbuttoned, the sleeves should come down to the center of the back of your hand (or the first knuckle of your thumb).How should a formal shirt fit?
The best dress shirts fit comfortably around the chest, under the armpits, and across the upper back, giving you a full range of motion. A fitted shirt will feel snug, but not too tight. Your chest should "fill out" the shirt in a way where your body is discernible under the fabric.How tight should a shirt collar fit?
The dress shirt collar should fit comfortably without being too loose. As tight or snug as possible without being uncomfortable. You should be able to fit 1-2 fingers between the collar and your neck when it is buttoned. You should not have a large gap showing between the collar and neck.How much of my shirt cuff should show?
The jacket sleeve should end approximately 1/4 inch to 3/4 inch before the shirt cuff. When you are sitting with your arms in front of you on a desk, you tend to show a little more cuff - approximately another half inch, to be precise. 
