How do you unlock the control lock on a Whirlpool washing machine?

How to Unlock the Controls for a Whirlpool DuetWasher

1. Locate the "Control Lock/Unlock" button on yourDuet's control panel.
2. Press and hold the "Control Lock/Unlock" buttonfor three seconds.
3. Release the "Control Lock/Unlock" button when thecontrol lock icon on the display disappears.

.

Also to know is, how do I get the control lock off my washing machine?

Select and hold END OF CYCLE SIGNAL for 3 seconds untilthe CONTROL LOCKED Status light turns off. If thatdoes not do it, try putting the machine into diagnosticmode. The washer must be empty and the control mustbe in the OFF state before pressing the touch-pad sequenceto start the test.

Secondly, how do you unlock the controls on a Whirlpool oven? To lock the control panel, press and holdLOCK for 3 seconds. An indicator light above Lockwill turn on. To unlock the control panel, press and holdLOCK for 3 seconds. The indicator light will turn off, andthe cooktop is ready for use.

Beside this, what is control lock on washer?

The Control Lock feature on Front Load Washerscan prevent any selections from being made when activated. Thecontrols can be locked or unlocked after a cycle hasstarted. To lock or unlock the washer controls: Pressand hold the LOCK button for 3 seconds.

How do you reset a Whirlpool washing machine?

1. Unplug the washer for 1 minute from the electrical outlet.
2. Plug the washer back in and lift and lower the lid 6 timeswithin a 12 second period. You have 30 seconds to start lifting andlowering the lid.
3. The motor has now been reset and is ready for you to start acycle.

Related Question Answers

How do you unlock a front load washer?

How to Manually Unlock a Kenmore Front Load WashingMachine

1. Touch "Control Lock" for five seconds until "CL" disappearsfrom the washer's display to unlock the control panel.
2. Press "Start/Pause" to manually pause the cleaning cycle.
3. Pull the door's handle to open the door and add or remove theclothing from the washer.

How do you reset a front load washer?

Unplug the washer from the power outlet or turnthe circuit breaker to the unit off. With the power disabled, pressand hold the START/PAUSE button for 5 seconds. Plug thewasher back in, or turn the circuit breaker backon.

What does LC mean on a Whirlpool washer?

If the control lock has been activated, the control willnot function. If you try to push buttons, you may see the code"LoC" or "LC" (depending on your model). This is a reminderthat you have set the control lock, and need to de-activate it toallow the washer controls to function.

How do I reset my Whirlpool Duet washing machine?

Unplug the washer for 30 seconds to attempt toreset the Duet washer control. You can manuallyunlock the washer by removing the top (remove screws on theback of the top panel and slide the top panel back to liftoff.

How do I turn off the control lock on my Kenmore washer?

The solution for my Kenmore Elite he3 was topress the Drain/Spin button "and" main Start (press & hold)buttons at the same time for 3 seconds. Press drain/spin button andextended spin for 5 mins it will remove the control lock.This worked for me as a temporary fix. Next load I received a F2error code.

How do I turn off the control lock on my Whirlpool Duet Steam washer?

Select and hold END OF CYCLE SIGNAL for 3 secondsuntil the CONTROL LOCKED Status light turnsoff.

How do I unlock my Whirlpool Duet washing machine?

How to Unlock a Whirlpool Duet Washing Machine

1. Unplug the power cord of the washer from the outlet.
2. Locate the toe panel.
3. Lift the panel slightly and pull it forward to remove.
4. Reach up inside the front panel and locate the door latchassembly on the right side of door.
5. Feel for a tear-drop shaped tab on the bottom of the door latchassembly.

What does control locked mean on a Whirlpool washer?

To unlock the controls: Press and hold the End OfCycle Signal button until the Control Lock light goes Off.To lock the controls: Press and hold the End Of CycleSignal button until the Control Lock light comesOn.

How do you manually unlock a Whirlpool washing machine door?

Pull down on the bottom panel and pull it away from thewasher. Reach through the open panel and up to thedoor lock. Find the release ring below the lockingmechanism. Pull down on the ring to unlock thedoor.

How do you unlock the control lock on a Whirlpool dryer?

Instructions

1. Press and hold for 3 seconds the "Control Lock/Unlock" buttonon the control panel to lock the control panel.
2. Listen for a double beep and observe the "Control Lock" statuslight is lit when the control lock is in effect.

How do I turn off the control lock on my Maytag washer?

To turn off Control Lock, press and hold thecontrol lock button(s) designated for your model for3 seconds. The light will turn off. If the dishwasherhas a dedicated Control Lock button in the Optionsselections, press and hold CONTROL LOCK for 3seconds.

What does control lock mean on a dryer?

Some models offer a control lock feature. Youcan lock the controls to prevent any selections frombeing made. Or you can lock the controls after youhave started a cycle. To lock and unlock the dryercontrols: Press and hold the Extended Tumble and - (minus)buttons for 3 seconds.

How do I unlock my GE washing machine?

To unlock the washer controls, press andhold the lock button for 10 seconds. The control lock icon on thedisplay will light up when it is on. To unlock thewasher controls, press and hold the lock button for 10seconds. I do not have children.

How do you unlock the controls on a Whirlpool stove?

Method 1 Hold it for a few seconds (usually 2 to 5 seconds).Wait to hear a beep that indicates the panel is unlocked. Itwill usually say things like "Locked," and "L" on the display if itremains locked. Repeat the procedure to lock or unlockthe control panel.

What is control lockout on a range?

The range Lockout feature allows the user to lockout all oven and surface burner operation. As of summer 2013 (withthe exception of the CGS985, CGS990, and C2S985) the controllockout button locks out the oven controls only, not thegas burners.

How do you unlock Whirlpool oven?

Door is locked when starting or using theoven Turn the power off at the circuit breaker or fuse boxfor one minute, then turn the power back on. Allow the ovento cool, approximately 30-90 minutes, move the latch arm to theleft to unlock the door.

How do I unlock my oven?

Range - Oven Door Won't Unlock. If thereis food in the oven, let the oven cool to roomtemperature and try to unlatch the door. If no food or utensils arein the oven, start a self-clean cycle, then hit Clear/Offafter 60 seconds. If that does not unlock the door, run ashort self-clean cycle (1-2 hours).

What is control lock on Whirlpool oven?

Unlock the Oven Control and OvenDoor The lock feature shuts down the controlpads (buttons) and locks the oven door to avoidunintended use of the oven. The lock feature ispreset unlocked, but can be locked. If the oven iscurrently in use, the controls and oven door cannotbe locked.

What does e2 f3 mean on a Whirlpool oven?

The error code F3 E2 is telling you theelectronic control on the range detected a high temperature in theoven. This can be caused by a defective oventemperature sensor or the electronic range control(ERC).