How do you set up a rockshox fork?

Five ways to set-up a RockShox fork

Bottomless Tokens can be used to tune the air spring volume.
Use the O-ring in conjunction with the markings to set your sag.
RCT3 models offer low-speed compression adjustment, but only in the open setting.
Rebound is adjusted at the base of the right leg.
Push the lever in and turn to adjust the Maxle tension.

Hereof, how do RockShox forks work?

The suspension lets the wheels move up and down to absorb small bumps while keeping the tires in contact with the ground for better control. It also helps the rider and bike absorb large shocks when landing jumps. Both the front and rear suspension systems contain two essential elements: a spring and a damper.

Additionally, how do you change RockShox in Revelation? According to the service manual, you cant adjust the travel on the dual air shaft forks. In the solo air shaft forks you can increase it by changing to a long air shaft. Looks like RS have made it expensive to change the travel on the new revelations.

Beside above, do bottomless tokens reduce travel?

The bottomless tokens are used to change the overall feel of the air spring in the fork, for tuning and ride performance. Changing bottomless tokens does not change the travel of your fork.

How much fork travel should I be using?

Set sag between 20-30%. If you only ride smooth trails, you should still use about 3/4 of the travel. Measure this, since the exposed stanchion is longer than fork travel. If you start to ride harder or start to ride rougher trails and bigger drops, you will need to add air.

How do you equalize a mountain bike fork?

The way to equalize your negative airspring is to let the air out of the positive chamber, then pull up on the bars (The fork should suck down into it's travel, which is due to the pressure in the negative chamber). You'll hear/feel a slight sucking sound, then the fork will extend to full travel.

How do you set a low speed compression pike?

Setting Pike Low Speed Compression

Set air pressure until you get the feel you want int he first couple inches of travel (plushness).
If you're bottoming out often, add a bottomless token (air volume reducer) included with the fork, air back up to the pressure you liked before.

How do I maintain my mountain bike forks?

Clean your forks with water; a hose is best, but if you use a jet wash then turn the bike upside down first so, as not to force water inside the fork seals. Be sure to remove all dirt from the fork stanchions and around the seals, especially between the stanchions and fork arch at the front of the fork.

How do you remove a fork from a mountain bike?

Here's how to remove a MTB fork and headset.

Remove the front wheel.
Loosen and remove the stem top cap, bolt and headset spacer.
Loosen the stem pinch bolts.
Remove the brake levers from the handlebar.
Lift the handlebars/stem off and set aside.
Remove the headset spacers and headset top cover.
Slide the fork down and out.

How do you maintain a suspension fork?

Clean your forks with water; a hose is best, but if you use a jet wash then turn the bike upside down first so, as not to force water inside the fork seals. Be sure to remove all dirt from the fork stanchions and around the seals, especially between the stanchions and fork arch at the front of the fork.

How often should I service my mountain bike forks?

On modern, cartridge style suspension forks, most manufacturers recommend at least changing the lubrication oil every 30-50 hours, and doing a full, more extensive damper overhaul once a year.

How do you lube a fork suspension?

Keeping oil in and dirt out To encourage the oil to lubricate the upper bushes and the seals in the fork leg, it is helpful to turn the fork upside down to let the lubrication run down. Turn your bike upside down and allow 20 minutes for the oil to run down into the seals.

Can you use engine oil in Forks?

Synthetic motor oil is fine for the lowers for semi-bath forks, and is often recommended in service manuals. I don't know the answer that you seek, but I will say that any motorcycle/ atv shop will have fork oil. Don't know if that crossed your mind or not, but I would go that route before using motor oil in your fork.

What is the best RockShox fork?

The best 160 mm MTB fork you can buy

Fork	Travel	Actual Weight (kg)
Marzocchi Z1	130 – 180, 160	2.22 kg
Ohlins RXF 36 Coil	140 / 150 / 160	2.25 kg
RockShox Lyrik RC2	150 /160 / 170 / 180	1.95 kg
RockShox Yari RC	150 / 160 / 170 / 180	2.05 kg

What year is my RockShox fork?

On the back of the crown is a serial number. The number after the first letter is supposedly the year of the fork. So, for the fork above would be a 2012 fork. If there was a 3 after the letter it would be a 2013 fork and so on.

How do front suspension forks work?

The predominant type of front suspension is the suspension fork. It works like the front suspension on a motorcycle. When the fork moves up (when the bike hits a bump), the spring gets compressed and the piston forces fluid through the orifice.

How does a MTB fork work?

It works like the front suspension on a motorcycle. The bottom part of the fork, which holds the wheel, fits over the tubes that connect the fork to the frame. When the fork moves up (when the bike hits a bump), the spring gets compressed and the piston forces fluid through the orifice.

What are the best RockShox?

RockShox fork range

RockShox Pike. The Pike is RockShox go-to trail fork, using 35mm upper legs.
RockShox Lyrik.
RockShox Yari.
RockShox SID.
RockShox RS-1.
RockShox Reba.
RockShox Bluto.
RockShox Judy.

What is an air spring fork?

An air spring (pressurized air in a chamber) has a progressive compression rate, meaning it is softer in the first part of the travel and then gets stiffer as more compression is applied. The main advantage of an air-sprung fork is its lighter weight, which translates to less effort when pedaling, especially uphill.

What is fork rebound?

Rebound damping regulates the speed at which your fork or shock recovers, or bounces back, from an impact and returns to its full travel. Much like a compression circuit, rebound damping relies on oil moving through a circuit to regulate the speed at which the suspension extends after being compressed.

Can I put a 120mm fork on a 100mm bike?

For all around riding, should be fine, but you may notice it's a bit harder to keep the front wheel down on the steep uphills. You're turning black metallic. I put a 120mm airshaft in my 100mm Reba that was already mounted on a steel HT frame built for a 100mm fork. I liked it better at 120.