How do you reset the maintenance required light on a 2004 Scion XA?

Press and hold the odometer button. Turn the key to the off position while still holding the odometer button. Without releasing the odometer button, turn the key to the run position. Wait a few seconds for the light to turn off.

.

Keeping this in consideration, how do you reset the maintenance required light on a 2004 Scion XB?

How to Reset the Maintenance Light on a 2006 Scion XB

1. Insert your key into the ignition and start the engine.
2. Press the odometer toggle stem until the total mileage is displayed (not the "trip" mileage).
3. Turn the key to the "Off" position.
4. Press and hold the odometer stem.
5. Hold the odometer stem until the display shows "000000." Turn the key to "Off" then turn it back on.

Furthermore, what does the maintenance required light mean on a Scion XB? The maint reqd light means that Scion recommends servicing your xB soon. Depending on what the vehicle mileage is when the light came on, it could mean that any of the following maintenance is needed: Engine oil change. Fluid check.

Additionally, what does it mean when your maintenance required light stays on?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle's maintenance schedule. Most often this just means your vehicle might be due for an oil change.

How do you turn off the maintenance required light on a Scion xB?

Scion xB Maint Reqd Light

1. Turn the key to the on position with the odometer showing.
2. Press and hold the odometer button.
3. Turn the key to the off position while still holding the odometer button.
4. Without releasing the odometer button, turn the key to the run position.
5. Wait a few seconds for the light to turn off.

Related Question Answers

How do you turn off the maintenance required light on a Scion tC?

How to Reset the Maintenance Light on a Scion tC

1. Turn the tC's key to the "On" position. Press the trip odometer reset stem until "Trip A" displays on the odometer screen.
2. Turn the tC's key to the "Off" position, and then turn it back on. Continue holding the trip odometer reset stem until five dashes appear on the odometer screen.

How do I turn off the maintenance required light on my Scion?

How to Reset the Maintenance Light on a Scion tC

1. Turn the tC's key to the "On" position. Press the trip odometer reset stem until "Trip A" displays on the odometer screen.
2. Turn the tC's key to the "Off" position, and then turn it back on. Continue holding the trip odometer reset stem until five dashes appear on the odometer screen.

How do you reset the maintenance required light on a 2010 Scion XB?

How To Reset Oil Maintenance Light on 2008-2015 Scion xB:

1. Next, turn the ignition “off”
2. Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position.
3. Continue to hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.

How do you reset the dash lights on a Scion XB?

To reset engine light:

1. Turn on ignition.
2. Press button to Trip A Mode.
3. Turn ignition off.
4. Turn ignition on while holding button until light goes off.

How do you reset the maintenance required light on a Scion xA?

Scion xA Maint Reqd Light

1. Turn the key to the on position with the odometer showing.
2. Press and hold the odometer button.
3. Turn the key to the off position while still holding the odometer button.
4. Without releasing the odometer button, turn the key to the run position.
5. Wait a few seconds for the light to turn off.

What does VSC mean on a 2005 Scion XB?

Vehicle Stability Control

How do you reset the maintenance required light on a Toyota?

Toyota Maintenance Required Light

1. Turn the key to the on position.
2. Next, determine that the odometer reading is displayed.
3. Then turn the key back off.
4. Now push and hold the reset button for the trip meters.
5. Finally, while continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.

How long can I drive with the maintenance required light on?

The maintenance required light will remain on and be solid after the mileage interval reaches 5,000 miles since the light was reset. This is the final reminder to bring your car in for service.

Why is my maintenance required light on after oil change?

The computer system starts tracking the mileage after every reset and the light will come on after you drive 5,000 miles. When you change the oil or have the vehicle serviced, you will need to turn off maintenance light Toyota so that it can again start counting for 5,000 miles.

How do you turn off the maintenance required light on a Toyota push start?

Start car and use the reset button to move odometer reading to Trip A. Shut off engine. With foot off the brake, depress the Start button three times, while holding down the reset button. Continue holding for a few seconds and you'll see the Maint Required light turn off.

What does the maintenance light mean?

However, a Maintenance Required light is a light that comes on after a set amount of miles. It's there to remind you every so often to check and change things like your oil and such. It can usually be reset, which will turn it off until the car has recorded that set amount of miles again.

How do you reset the oil change light?

How to Reset the Oil Light After an Oil Change

1. Turn the car's systems on, but leave the engine off.
2. Locate the "Reset" button or stick, which is typically located on the dashboard, near the speedometer and fuel gauge.
3. Hold the button down until the "Oil" icon or word starts to flash, or the indicator lights show some other sign of resetting.

How long can you go without an oil change after the light comes on?

Oil Pressure light would mean immediate stop. The oil change light is a calculation of what they think is safe to drive the average oil, assuming in the next 500 miles you will obey it, and assuming your car is in good repair. So 500 miles would be appropriate.

How do you turn off the maintenance required light on a Scion xD?

Scion xD Maint Reqd Light

1. Turn the key to the on position with the odometer showing.
2. Press and hold the odometer button.
3. Turn the key to the off position while still holding the odometer button.
4. Without releasing the odometer button, turn the key to the run position.
5. Wait a few seconds for the light to turn off.

What does it mean when maintenance required light is on Toyota?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. Sometimes shops neglect to reset the maintenance-required meter if the light doesn't happen to be on yet when they are changing the oil.

How do you reset the maintenance required light on a 2005 Scion XB?

How to Reset the Maintenance Light on a 2006 Scion XB

1. Insert your key into the ignition and start the engine.
2. Press the odometer toggle stem until the total mileage is displayed (not the "trip" mileage).
3. Turn the key to the "Off" position.
4. Press and hold the odometer stem.
5. Hold the odometer stem until the display shows "000000." Turn the key to "Off" then turn it back on.

How do you reset the maintenance required light on a 2006 Scion xA?

Scion xA Maint Reqd Light

1. Turn the key to the on position with the odometer showing.
2. Press and hold the odometer button.
3. Turn the key to the off position while still holding the odometer button.
4. Without releasing the odometer button, turn the key to the run position.
5. Wait a few seconds for the light to turn off.

What does S OFF mean on Scion tC?

It means sweep on or sweep off. When you start the car you can have the gauge needles sweep or not. Lowerstandards. 2009 Scion tC View Lowerstandards's Ride.