How do you reprogram a combination lock?

How to Set a Combination Lock

Pull up the shackle to unlock.
Rotate the shackle 90 degrees counterclockwise and press down.
Hold down and continue to turn the counterclockwise another 90 degrees.
Set your own combination by turning the dials.
Turn the shackle back as normal then the setting is complete.

Correspondingly, how do you reset a combination lock?

Take these steps to reset your lock:

Pull up the shackle to open the lock.
Rotate the shackle 90° counterclockwise and press all the way down.
Hold down the shackle and set your own combination by turning dials.
Turn the shackle back as normal. The setting is now complete.

One may also ask, how do you figure out the combination to a 3 digit lock? Even locked, there is a little bit of wiggle, so the trick is as follows:

Put pressure on the lock by sliding it across the bail as far as it will go.
Rotate each digit until it gets very hard to move.
If it gets really hard, try one more click.
Keep pressure on the bail, and try moving the numbers one at a time.

Furthermore, how do you reset a 4 digit combination lock if you forgot the code?

If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.

How do you open a combination lock if you forgot the combination?

Just reset the combination:

Set the dial to 000.
Turn the shackle at a 90 degree angle from the lock position.
Push the shackle down (outside of the lock).
Set the desired code.
Pull the shackle up.
Turn it back to the lock position.

How do you open a 4 digit master lock without the combination?

If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.