Resetting a Hunter X-Core is easy. To reset the irrigation controller, all you need to do is press the negative, the hand and the program keys at the same time, then use a small tool to press in the small reset button on the side of your controller. A small screwdriver or a pen will do the trick.
.
Also, how do I reset my Hunter SRC Plus?
SRC Plus Reset
- Press and hold down the , and buttons.
- Press and release the RESET button in the lower wiring compartment.
- Release the , and buttons. The display should now show 12:00a. m.
- All the memory has been cleared and the controller may now be reprogrammed.
how do I reset my sprinkler timer? How can I clear all the programming and reset my Rain Bird ESP-Me sprinkler timer back to the factory default settings?
- Turn the dial to Seasonal Adjust.
- Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word "CLEARED" on the screen.
- Turn the dial back to AUTO RUN.
In this way, how do you winterize a hunter SRC Plus sprinkler system?
To start the blow out, shut off the irrigation water supply and, with the compressor valve in the closed position, attach the air compressor hose to the fitting. Activate the station on the controller that is the zone or sprinklers highest in elevation and the furthest from the compressor.
How do I reset my irrigation system?
How to Reset a Sprinkler System
- Turn the control dial to the "off" position.
- Press the "next" button to access the clear-memory feature.
- Press and hold the "off" button until the display stops blinking.
- Turn the control dial to the "run" position.
- Press and hold down the "minus" arrow and "prog" buttons simultaneously.
How do you test a hunter sprinkler system?
To initiate the test program:- Press and hold the PRG button. The station number will be flashing.
- Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes.
- After a 2 second pause, the test program will begin.
Why does my hunter sprinkler system run twice?
Tabs. A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time. The controller will operate the stations in numerical order.Why does my sprinkler system keep running?
There are two reasons why your sprinklers would continue running: It's possible your valves have been opened manually. You'll need to locate your valve box(es) and turn the solenoid(s) clockwise until snug. The solenoid is located on the top of the valve and looks like a cylinder with two wires protruding out of it.How do I override my hunter thermostat?
Should you want to temporarily override the program—for example, if you stay home from work one day—here's the process:- Hold down one of the UP/DOWN arrow keys until the display flashes.
- Use the arrow keys to move the temperature setting to the desired temperature.
- Press the HOLD/RETURN button.
What does no AC mean on a sprinkler system?
The "NO AC" display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller is running on the power supplied by the backup battery. Check the power source by plugging a lamp or radio into the wall outlet to verify there is power at the outlet.Why wont my sprinklers turn on?
Go to one of the irrigation valves and turn the solenoid 1/4 to 1/2 a turn counter-clockwise. If the valve opens and sprinklers turn on, your valve is working and you'll need to check the controller and field wiring. If the valve did not turn on any of the sprinklers, the water to the valves is still off.How do you drain a hunter sprinkler system?
How to Winterize a Hunter Sprinkler System- Locate the main water shutoff valves inside your home and turn them off by laying the ball valve lever perpendicular to the main water line.
- Locate the main drain valve, which is close to or on the main line shutoff valve, and place a bucket beneath it.
When should I worry about sprinkler system freezing?
Sprinkler pipes and other components are at risk of freezing and breaking when temperatures drop below 32 degrees Fahrenheit. Immediate damage can occur to exposed pipes and sprinkler equipment with the first freeze of winter.How do you drain a sprinkler system?
Automatic Drain Valves- Turn off the water supply by closing the main valve to the sprinkler system. As pressure inside the system falls, it will drain water automatically.
- Open the drain cap between the main valve and the backflow device.
- Lift each sprinkler head to drain out any residual water.
